Diagram of the blasting head of the shot blasting machine

The polishing head of a shot blasting machine is one of its core components, responsible for accelerating and projecting abrasive onto the surface of the workpiece. The following is a detailed diagram of the blasting head of the shot blasting machine:

1. Shot blasting machine: Driven by an electric motor, the abrasive is accelerated and ejected through the high-speed rotation of the impeller. The structural design and number of blades of the shot blasting machine will affect the shot blasting effect and efficiency.

2. Directional sleeve: installed at the outlet of the shot blasting machine, used to adjust the direction and angle of abrasive projection, so that the abrasive can evenly cover the surface of the workpiece.

3. Shot wheel: located inside the shot blasting machine, it evenly distributes abrasive to the blades through rotation, ensuring the continuity and stability of shot blasting.

4. Blade: Installed on the rotor of the shot blasting machine, it accelerates and ejects abrasive through high-speed rotation. The material and shape of the blades will affect the shot blasting effect and service life.

5. Guard plate: Installed on the inside of the shot blasting machine shell, it is used to protect the shell from direct impact and wear of abrasives, extending the service life of the equipment.

6. Feed inlet: Abrasive enters the shot blasting machine through the feed inlet and is ejected after passing through the action of the dividing wheel and blades.

7. Discharge port: The cleaned abrasive and impurities are discharged through the discharge port and processed by the recycling system before being reused or discarded.

From the above diagram, it can be seen that the blasting head of the shot blasting machine is a complex system, and the coordinated work of various components is necessary to ensure the efficient operation and good cleaning effect of the equipment.